Saving Settings

[Stefan64]

It's been a long time since I've had to do this. How do you save your settings so that when you have to reinstall Windows/AutoCAD (or the whole drive, like me) you don't have to try and remember them all?

Steve

 

[hyposmurf]

The settings are saved on a *.arg file.

Look up for it and keep in a safe place.
Also save the *.mn* files

http://www.cadtutorforum.net

 

[Stefan64]

I copied any".mn" files but there are no ."arg." I falled to mention this is LT, if that makes a difference.
Steve

 

[hyposmurf]

I do not know nothing about LT

http://www.cadtutorforum.net

 

[Stefan64]

Yeah, I get that a lot. Thanks for the help,
Steve

 

[diamondjim]

Menu files (aclt.mnu, aclt.mnc, aclt.mns, and aclt.mnr)
You might search on these separately to see where they
are loaded. Have you used the help function within
acadlt to help with your question?

 

[lpseifert]

This site has a profiles manager for LT.

http://www.lt-extender.com

 

[Stefan64]

Thanks Guys. The Help function needs help, and I've got all the ".mn_"'s copied over. It's not a huge problem as I don't plan on blowing up my drive again in the near future (who does?); it's just a pain trying to remember all the little convenient things that get developed over the years.

I'll try the extender and see what happens.

Steve

 

[borgunit]

This may help with some of the questions...

http://www.activedwg.com/InfoPages/SettingsTransfer.htm

"Everybody is ignorant, only on different subjects." — Will Rogers