Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
SCBF with Column in weak Axis Design...
- Thread starter X4vier
- Start date
SethGuthrie
Civil/Environmental
Currently the beam to column connection in the SCBF Gusset is attached using angles or single plates only. We will be adding the option to have a welded beam stub cantilever that is spliced beyond the gusset in the near future, pending some clarification from AISC.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question