Screw Compressor oil separator

[snips13]

Hello , I am currently trying to size a T-type oil separator for a rotary screw compressor. I was wondering if anyone could point me to the right direction where I can find an Excel spreadsheet to help me size the separator. Any help would be greatly appreciated.

 

[zdas04]

I can't tell you how tired I am of these "Please give me a spreadsheet to __________ because I'm just too busy to learn the arithmetic" threads. This could have been a useful and worthwhile discussion of the things that must be considered in keeping the compressor oil in the process loop, but no, we are looking for a free spreadsheet. I'll pass.

David Simpson, PE
MuleShoe Engineering

"Belief" is the acceptance of an hypotheses in the absence of data.
"Prejudice" is having an opinion not supported by the preponderance of the data.
"Knowledge" is only found through the accumulation and analysis of data.
The plural of anecdote is not "data"

 

[snips13]

You are free to pass on what you wish. Sites like these are made to help people and to share information not to bash. If and when I find a spreadsheet I will gladly " Share " it with our peers on this site. As for any other spreadsheets that I currently created I will gladly " share " those as well. So I kindly request that if you want to bash someone please don't do it on my thread.Thank you

 

[nfinit]

while I am certain many people on this site would be more than willing to help you verify work you have done, asking for the work to be done for you (no matter how politely) is usually met with a little contention.

while it may seem sarcastic...I did a quick search using

http://www.google.com

and found several spreadsheets that may fit your needs.