bikerbarny
Automotive
- May 25, 2007
- 6
I was wondering if anybody could help me...
I have spent most of the day unsuccesfully installing I-deas 12 onto my new laptop.
At first everything seemed fine, and the program worked.
However, on shutting down the computer and starting up again, i encountered problems.
FLEXlm lisence finder pops up and informs me that "FLEXlm could not determine where to find the licensing data it needs."
I am giving the option to track the license file down, which i do. however, this does not work and i am left with the following result:
"Detected loss of communication with I-DEAS license daemon.
Contact your system administrator.
OK - Retry, Cancel - Exit without save.
You cannot connect to the I-DEAS FLEXlm resource lock server.
Please review your license file and resource locking
configuration."
However, running the LMTOOLS server status enquiry reveals that everything is "UP" and as it should be.
I have also encountered an error to the effect that Telnet port 23 could not be connected.
I have tried re-installing many differant times, using differant hard discs, all firewalls and suchlike are disabled, yet i still get the same problem- it runs perfectly untill i reboot.
If anyone could shed some light on the situation, i would really appreciate it.
thanks very much for your time.
I have spent most of the day unsuccesfully installing I-deas 12 onto my new laptop.
At first everything seemed fine, and the program worked.
However, on shutting down the computer and starting up again, i encountered problems.
FLEXlm lisence finder pops up and informs me that "FLEXlm could not determine where to find the licensing data it needs."
I am giving the option to track the license file down, which i do. however, this does not work and i am left with the following result:
"Detected loss of communication with I-DEAS license daemon.
Contact your system administrator.
OK - Retry, Cancel - Exit without save.
You cannot connect to the I-DEAS FLEXlm resource lock server.
Please review your license file and resource locking
configuration."
However, running the LMTOOLS server status enquiry reveals that everything is "UP" and as it should be.
I have also encountered an error to the effect that Telnet port 23 could not be connected.
I have tried re-installing many differant times, using differant hard discs, all firewalls and suchlike are disabled, yet i still get the same problem- it runs perfectly untill i reboot.
If anyone could shed some light on the situation, i would really appreciate it.
thanks very much for your time.