Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

SE II test

Status
Not open for further replies.

rt06

Civil/Environmental
May 22, 2006
21
I am working as a structural engineer in Texas. I will take SE I test this month. I would like to take SE II test next spring. Does anybody know whether there is any requirement for taking this test? Do I need to go to California to take the exam? I asked Texas board this question but they are not answering.

Thanks a lot.
 
Replies continue below

Recommended for you

It looks like the SE2 is offered in Texas-


It also looks like scheduling for the SE2 is done through the Texas board according to above. I wouldn't go to California to take the SE2 if you can take it in Texas.
 
I took the SE1 and SE2 in Nebraska.

It is usually proctored by the local engineering board or NCEES and is offered in numerous locations...I think even in most states if not all states.

 
Thanks Haynewp and JAE for the valuable information.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor