Searching/Selecting Deactivated Features In The Specification Tree 1

[TorsionalStress]

Using Catia V5R19;

Is there a way to select deactivated features in the part workbench specification tree using the “Search” command?

Any response will be greatly appreciated!

 

[TorsionalStress]

Procedure To Searching/Selecting Deactivated Features Using The “Search” Command;

1.“Search”
2.Click “Advanced” tab
3.Under “Workbench”, select “Part Design”
4.Under “Type”, select “PartDesign Feature”
5.Under “Attribute”, select “Activity”
6.At the “Attribute Criterion” prompt, select “Activity =FALSE”
7.Click “OK”
8.Click “Select & Search” (Features become highlighted)

 

[DBezaire]

You can use Tools --> Parameterization Analysis
Set the filter to Inactivated Features.

Regards,
Derek

 

[ferdo]

Or you can modify this catvba according to your needs.

http://www.2htts.com/CATBlog/index.php?itemid=49

Regards
Fernando
cadromania.net - Romanian CAD forums

 

[marcofa]

Hi Ferdo,
in your link adress above, download link dont work with right click and save. It's saved an htm that open unreadeble document.
Marco

 

[ferdo]

Try this, should work, it is a catvba file, not zip or something else, just click on the link

http://2htts.com/CATBlog/media/1/DeleteBodies_Share.catvba

Regards
Fernando
cadromania.net - Romanian CAD forums

 

[ferdo]

It seems is not working like I expected (at least in Firefox), so right click and save link as...

Regards
Fernando
cadromania.net - Romanian CAD forums

 

[marcofa]

Always open htm document
Marco

 

[ferdo]

Here it is.

Regards
Fernando
cadromania.net - Romanian CAD forums