Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section Modulus for Trap Members 10'-6" On Center

Status
Not open for further replies.
ShawnO1Again

ShawnO1Again

Mechanical
Aug 14, 2023
1
Way back in the day (13 years ago) I posed a question about reducing the trapeze pipe member size if the spacing of trapezes decreased from 15'-0 (refer to NFPA table). I have a warehouse with a large number of trapeze hangers so I thought I'd take another stab at answering the question. See previous closed thread link below...
Link

Lo and behold...
Link

 
Status
Not open for further replies.

Similar threads

Jeng84
  • Question
Schedule 40 vs 10 for pre-action system
Replies
3
Views
2K
MGXFP
MGXFP
StruggleEngr
  • Question
NFPA 780 Chapter 8 Section 8.4 Interpretation
Replies
2
Views
1K
StruggleEngr
StruggleEngr
Ciaci
  • Question
10 years sprinkler test (sensitivity and temperature activation)
Replies
1
Views
2K
cdafd
cdafd
GlorifiedPlumber1984
  • Locked
  • Question
6" schedule 10 pipe in Wood Assemblies
Replies
5
Views
402
MGXFP
MGXFP
WKTD
  • Locked
  • Question
Fire riser entrance > 10 feet
Replies
1
Views
394
cdafd
cdafd

Part and Inventory Search

Sponsor

Back
Top Bottom