Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Section Modulus for Trap Members 10'-6" On Center

Status
Not open for further replies.

ShawnO1Again

Mechanical
Aug 14, 2023
1
Way back in the day (13 years ago) I posed a question about reducing the trapeze pipe member size if the spacing of trapezes decreased from 15'-0 (refer to NFPA table). I have a warehouse with a large number of trapeze hangers so I thought I'd take another stab at answering the question. See previous closed thread link below...
Link

Lo and behold...
Link

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor