section view cut color

[Lars1978]

Hi All,

Where can I set the section cut color for a section view in the drafting environment?

(I'd like to set it to the body color?)

Thnx.


Lars

Lars
NX11.0.1.11 native
Solid Edge
Inventor

 

[cowski]

I assume you are using a fully shaded view?
In the view settings -> shading, click on the "shaded cut face color" this will bring up the color dialog box; press "control" and click on the currently selected color. This will deselect the color and cause NX to inherit the cut face color from the body.

www.nxjournaling.com

 

[Lars1978]

Hi Cowski,

Thnx a lot. Can it be that you have to use the deselect all color button when in the shaded cut face color dialog box. This works for me. The ctrl key didn't work for me?

Lars

Lars
NX11.0.1.11 native
Solid Edge
Inventor

 

[cowski]

Holding down the control key when you click on the color box should deselect it. The "deselect all" button is another way to do it.

www.nxjournaling.com