Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Seeking architect/designer for chemical plant

Status
Not open for further replies.

Marydiff

Specifier/Regulator
Nov 15, 2002
1
We are is actively seeking consultants/architects/plant designers for the design of a chemical plant in Tucson, AZ. Does anyone know how/where we can find this expertise?
The contracted company should preferably be located in Southern Arizona. Thank you!
 
Replies continue below

Recommended for you

Your State Professional Engineering Board or Association will be able to help .. you likely need to start with chemical project engineers, professional engineers licenced in your State to approve designs.
Best wishes.
 
Marydiff, Have you checked into the likes of Bechtel, Fluor, Brown & Root, JR Brown, Davey, Sargent & Lundy, just too name a few? They can set up a turn key project for you.

Goodluck!

saxon
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor