Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

selection pressure gauge after PRV

Status
Not open for further replies.

Ahmed Elzawawi

Bioengineer
Oct 9, 2017
15
I have some inquiry regarding the pressure gauge selected range & fittings , for natural gas line size (2 inch) to fit after reducing regulator valve ( downstream ) the pressure will reduce from 16 bar to 3.5 bar , pressure max = 18 bar , min pressure = 1.5 bar , max flow 43.5

Ahmed
 
Replies continue below

Recommended for you

When you ask a question on this or any forum, it's up to you to go back and look for an answer.

Roydm answered your question almost a week ago, on 21 December 2017.

Check out his answer:

viewthread.cfm
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor