Self Levelling/Low Viscosity Potting Compound

[courtl]

Hi,

I am looking for a fairly quick setting, low temp cure potting compound or epoxy/adhesive that is self levelling/low viscosity. It will be used to fill fairly wide/long (only 1 -2mm deep) voids in a PCB. It also needs to be non-conductive. It doesn't have to set hard, so can be rubbery. Can anyone suggest anything?

Thanks in advance,
Linda

 

[Compositepro]

Most two part epoxy will do that, like Devcon 2-ton epoxy from Home Depot. Sounds likev RTV silicone rubber would work too.

 

[KMort]

Perma-Flex Mold Company has an assortment of compounds that may work. Web page

http://www.perma-flex.com

Keith