Self-Reinforced nozzle for Pressure vessel

[ting123]

I was trying to make a self-reinforced nozzle with LIP for a thick wall vessel(thickness above 50mm)and i had a lot of issues making the same.Attached is the sketch and the model that i made. The model is not as i want. To explain in brief this particular part sits on a shell(cylinder) and the "lip" has the same curvature as that of the shell but this is integrated with the nozzle (see attached files how the part looks).

Can someone provide me how possibly i can easily model this part in solidwords.

 

[Eltron]

Is this a 2012 file?

Dan

http://www.eltronresearch.com

Dan's Blog

 

[kellnerp]

I can't see a thing. Send it in a CAD neutral format like jpg or pdf.People are using everything from 2009 to 2012.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

http://www.linkedin.com/in/engineeringtransport

Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."

 

[ting123]

Sorry, i forgot to upload the images for the self reinforced nozzle, attached same are below. And yes it is SW2012 part.

 

[CorBlimeyLimey]

ting123,

What is wrong with the part you show?

 

[kellnerp]

4shared.com is blocked here. Engineering.com is not.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

http://www.linkedin.com/in/engineeringtransport

Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."

 

[CorBlimeyLimey]

 

[SnTMan]

Except for perhaps a fillet between flange and body, it looks about right to me.

Regards,

Mike