Sewer Service Laterals and CIPP 2

[esass13]

I will be using CIPP to line VCP pipe. A lot of the services are bad and I need a way to connect ex. services to the CIPP (can't just cut our the CIPP to reinstate the service). I found Inserta Tee, which looks like what I need. Does anyone have experience with Inserta Tee or something similar? Other suggestions for making that connection?

Also, is there a good way to connect an HDPE service to the CIPP?

 

[bimr]

LMK's T-Liner system has been used successfully:

http://www.performanceliner.com/lateral/lateral_lining/

http://www.trenchlessonline.com/index/webapp-stories-action?id=11

You will have to make a cleanout to install the lateral liner.

You can probably make the connection to the HDPE with a Fernco rubber fitting.

 

[plastcc]

T-liner is a great method to repair laterals. (Star for bimr!) If all you need to do is to seal the connection then chemical lateral seal with a top hat may be all you need.
Inserta Tee is great for open excavation. This repair/connection method cannot be done remotely.