marouaha
Mechanical
- Jan 14, 2014
- 21
Hello,
I wont to model the shaker vibration using sine wave using msc nastran. this shaker is monted at the climped end
so i constraint the 1..3.4.5.6 dof and i apply a sinusoidal force at this climped end.
the shape i found are wrong. may some help me
I wont to model the shaker vibration using sine wave using msc nastran. this shaker is monted at the climped end
so i constraint the 1..3.4.5.6 dof and i apply a sinusoidal force at this climped end.
the shape i found are wrong. may some help me