Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

shear/torque strain gauges

Status
Not open for further replies.
Replies continue below

Recommended for you

Am I missing something? Any strain gauge is a torque strain gauge if it's correctly oriented...
 

Fair enough…

These are pre-oriented to 90 degrees as well as not as many leads and/or soldering to deal with vs single gauges.

I would prefer to have the product in a simpler package particularly when dealing with small diameter ( < 3/8") parts.

Further, 4 single gauges have been historically more expensive and then these preassembled and oriented gauges.
 
rosettes are "pre-oriented" ? and can be wired up for shear only.

another day in paradise, or is paradise one day closer ?
 
$200 for 5 s/g ... not too bad

another day in paradise, or is paradise one day closer ?
 
Again, it is $220 for one pkg. of 5 gauges. Omega is never cheap, they are convenient and quick.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor