Jan 9, 2007 #1 Stugots Mechanical Aug 11, 2005 43 I need to show the center of gravity in a drawing view. Anyone have any ideas?
Jan 9, 2007 1 #2 handleman Automotive Jan 7, 2005 3,411 Use the 3D sketch point at CG macro to add a 3d sketch point to the CG and then show it on the drawing. Upvote 0 Downvote
Use the 3D sketch point at CG macro to add a 3d sketch point to the CG and then show it on the drawing.
Jan 9, 2007 2 #3 CorBlimeyLimey Mechanical Nov 5, 2003 15,292 A "CG Point" macro can be found at http://www.solidworktips.com/macro_pages/index.htm Upvote 0 Downvote
Jan 9, 2007 2 #4 ctopher Mechanical Jan 9, 2003 17,506 Also one here ... http://mysite.verizon.net/mjlombard/macros.html Chris SolidWorks 06 5.1/PDMWorks 06 AutoCAD 06 ctopher's home (updated 10-27-06) Upvote 0 Downvote
Also one here ... http://mysite.verizon.net/mjlombard/macros.html Chris SolidWorks 06 5.1/PDMWorks 06 AutoCAD 06 ctopher's home (updated 10-27-06)
Jan 9, 2007 #5 handleman Automotive Jan 7, 2005 3,411 Whoops, thanks guys! I meant to either link it or give a googlin' tip, but I was a bit quick with the trigger finger! Upvote 0 Downvote
Whoops, thanks guys! I meant to either link it or give a googlin' tip, but I was a bit quick with the trigger finger!
Jan 9, 2007 #6 ctopher Mechanical Jan 9, 2003 17,506 We got your back! Chris SolidWorks 06 5.1/PDMWorks 06 AutoCAD 06 ctopher's home (updated 10-27-06) Upvote 0 Downvote
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
![[purpleface]](/data/assets/smilies/purpleface.gif "[purpleface] [purpleface]")
![[thumbsup2]](/data/assets/smilies/thumbsup2.gif "[thumbsup2] [thumbsup2]")