Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Siemens S7-300 Backup

Status
Not open for further replies.

xJAyx

Electrical
Oct 29, 2003
100
CA
Using Step-7, is there an easy way to connect to a Siemsns S7-300 and create a backup of all blocks and data?

Essentially I would like to take an as-found backup of an existing installation.

Thanks in advance,
Jay
 
Replies continue below

Recommended for you

Yes, you need to "upload" from the PLC to "PG". It's in the menu of Simatic Manager.

Alternatively, if you can turn off the system, then you can take out the MMC and copy from there.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top