Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

silica mining

Status
Not open for further replies.

Guest
we have a small community in Northern Calif and there is a company called  AMT advanced mineral tech INC and they plan to open a hydrocaly mined old gold mine and dig for  Silica we would like to know if this silica can be mined with no danger to the community, thank you
 
Replies continue below

Recommended for you

Firstly, it is Hydraulically mined; that is, in the latter part of the 19th century earth was removed with high pressure water to devices that removed gold by washing the soil.  Secondly, the silica AMT is after is in the form of common sand composed of SiO2 and/or larger pieces of rock high in silica, probably from a sedimentary rock called quartzite. Silica is most commonly used in the manufacture of glass which is nearly 100% silica. MSHA, the Mine Safety and Health Administration, routinely checks for silica in the air to make sure dust suppression procedures are being followed.  Your community will be in no danger and with proper reclamation procedures(which were not done in the 19th century) your community should reap the benefits of high-paying jobs.    
 
Status
Not open for further replies.
Back
Top