elenms
Mechanical
- Feb 10, 2015
- 13
I want to apply this equation on simulink.
alpha = omega * setta (as setta changes from 0 to 90 degree)
where:
setta :- angle.
omega :- angular velocity.
alpha :- angular acceleration.
I tried to make it So i made the following diagram
But I cannot insert values for setta!! So how to enter setta as changes from 0 to 90
alpha = omega * setta (as setta changes from 0 to 90 degree)
where:
setta :- angle.
omega :- angular velocity.
alpha :- angular acceleration.
I tried to make it So i made the following diagram
But I cannot insert values for setta!! So how to enter setta as changes from 0 to 90