Single-Screw Extrusion Text / Reference Recommendation

[Lloyd_1]

Hello. I am looking for recommendations for textbooks on extrusion, especially single-screw. Sources either you have found useful and approachable, or that a professor you liked required. References to guides are welcome too. Appreciate any help in this process.

Some of the materials to be extruded are nylon-6, TPU, PLA, and potentially PEEK/PEKK. May acquire other extrusion equipment later, so more general is okay too. I am currently using smaller-scale single-screw extruder for R&D purposes rather than production scale, so the principle mechanics are more relevant.

Has anyone had experience with the following text, and would recommend or not?
Polymer Extrusion 5E
Chris Rauwendaal
ISBN-10: 1569905169

Thanks for the help, everyone.

 

[rd_engineer]

Polymer Extrusion 5E - Chris Rauwendaal is one of the best books in polymer extrusion field. To many engineers there is the best book, recommended in almost engineering degrees/courses.

 

[Alexandr36484]

Write to me by mail alex03061989@gmail.com or at Whatsapp +79267858180, I will send you books from my library.
Rauwendal is only in Russian)