Sizing the H generator

[waserpower]

Hi guys.
I am just about to build a H generator on demand 4 car but I can't find some guide how to size it properly in regard to engine size. If there is some tip for this I would appreciate it. Thanks.

 

[slava74]

Look for SAE Paper 2000-01-1061: Adams J. et al, The development of Ford's P2000 fc vehicle. 2000.

 

[MechaEngine]

Hey Waserpower,
Try reading the section on Engine Conversion from Dr. Roger Billings book "Hydrogen Would View". He did his first engine conversion as a science project in High school back in the 60's and has many other conversions since then and built a few pretty impression H generators of his own.

Here is a link the the section in his book.

http://www.billingsenergy.com/Research.html

I hope this info helps!

 

[billy1717]

Hi Waserpower,
I was just going through the same thing that you are going through. I was actually making too much hydrogen and it was decreasing my mileage. I bought a book from some guy on how to make these things work correctly, now I am getting about 40% better mileage. The website is: <a href="

http://justin1958.acsecure.hop.clickbank.net/"

target="_top">Hydrogen Generator</a>