Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch Dimensioning

Status
Not open for further replies.
Replies continue below

Recommended for you

Ah... thanks. Looks normal now:)

+++++++++++++++++++++
NX 11.0.2.7
 
those arrows shows the degree of freedom that the endpoints that they are on-top-of has.
i.e

-|-> = free to move in X-direction / un-constrained in X

same symbol but vertical = free to move in Y direction / un-constrained in Y

when creating dimensions and constraints , these will disappear.

Regards,
Tomas


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor