Sketch still showing

[Adrian2]

Dear Folks;

In one of my SW2003 Models, the sketch profile for a rotate cut shows as a dark grey line in the model. I have checked all my dimensions and relations and the sketch is fully defined. The cut rotate works as it should. But the sketch wont go away. Is there something else I might have missed ?

Many thanks in advance

Adrian D

 

[SBaugh]

Click the plus sign next to the the feature to show the sketch. RMB (Right Mouse Button) the sketch and click hide sketch.

Hope that helps, Scott Baugh, CSWP
3DVision Technologies
credence69@REMOVEhotmail.com

http://www.3dvisiontech.com

http://www.3dmca.com

*When in doubt, always check the help*

 

[BBJT]

Yeah, what Scott said. You can also go under your view pulldown and uncheck sketches. This comes in handy when you have more than one sketch showing. BBJT CSWP