Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SSS148 on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sky Hooks 3

Status
Not open for further replies.

TDIengineer

Structural
Jun 12, 2013
247
Does anyone have a good specification for sky hooks?

I have an architect that seems to dislike columns altogether.
 
Replies continue below

Recommended for you

we've been rifling through the simpson catalogue for years looking for the skyhook
 
When all fails, no supports anywhere and hair is being pulled out.

The skyhooks save the day.

Please lets have a spec.
 
It's on the shelf... right next to the Dikfer and the Propwash...

Dik
 
If you can get in touch with Dr. Zharkov he'll be able to help you out. He invented the ray that kept an entire city aloft in the sky of Mongo. And he did it in 20 minutes too.
 
dik...the Dikfer is possibly the answer to almost all of our issues!! [lol]
Gimme access...I'll use it!!
 
37.1.1.0 Skyhooks shall be installed in accordance with all manufacturer written specifications and guidelines. The Contractor is solely responsible for the operating the Skyhook in a safe, controlled and professional manner. It is recommended that no living creature, whether it be animal or plant, be on the Project Site during operation of the ill-fated and mishap-prone Skyhook. The Architect shall review, coordinate and defend against all inevitable lawsuits.

"We shape our buildings, thereafter they shape us." -WSC
 
Batman used a Sky Hook when he was extracting the villain from Hong Kong in The Dark Knight. They work, you just need a passing airplane to attach to.
 
Is he short, perhaps he doesnt mind the low ceiling heights after you design you BAB.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor