Slide/guide Rails?

[Matt_Stt]

Hi all,

I have a large HMI control panel that needs to be used at all points along a long conveyor belt. approximately 10 metres. I would like to mount this HMI onto a rail that runs the length of the conveyor, with a linear bearing to slide this HMI up and down the rail (therefore conveyor) easily. Sounds pretty simple in theory but I cant seem to find a UK manufacturer of this. I'm sure its easy to find online but I can't get onto the right track by searching for linear slide rails/tracks etc...Can anybody point me in the right direction? or recommend a vendor for me to contact?

Cheers

Matt

 

[mcgyvr]

Basically any linear rail will work.. You just may need to put multiple rails connected to each other..
Could just be a wheel or 2 running in a track.. V-guide wheels,etc..
SO many ways to accomplish the need easily..

 

[tygerdawg]

Your application doesn't appear to need precision positioning.

http://www.pbclinear.com

may have a number of items that you may find interesting, if you can get them in the UK.


TygerDawg
Blue Technik LLC
Virtuoso Robotics Engineering

http://www.bluetechnik.com

 

[IRstuff]

You could try a modification of:

http://www.ebay.com/itm/Wood-5-12-F...hash=item282685d5e0:m:ms-E3vgaBfubyvcjjgcapvg

TTFN (ta ta for now)
I can do absolutely anything. I'm an expert!

https://www.youtube.com/watch?v=BKorP55Aqvg

faq731-376 forum1529 Entire Forum list

http://www.eng-tips.com/forumlist.cfm

 

[drawoh]

Matt_Stt,

How about a cart with casters?

--
JHG