Slider crank mechanism

[sudhakarn]

Hi,

I am trying to make a slider crank mechanism only in vain.I give you below the list of joints i made.

Revolute joint : between the support and the crank.

Revolute joint : Between the crank and the connecting rod

Revolute joint : Between the connecting rod and the slider

Prismatic joint : Between the slider and its support.

Rigid joint : Between the connecting rod and crank.

Awaiting your replies.Please let me know how to simulate this mechanism in CATIA Kinematics.



Regards,
Sudhakar.N

 

[gvi70000]

If you want someone to help you upload models not text. I will not start to make 3d parts only to help you.

 

[itsmyjob]

Revolute joint : between the support and the crank.

Revolute joint : Between the crank and the connecting rod

Revolute joint : Between the connecting rod and the slider

Prismatic joint : Between the slider and its support.

Rigid joint : Between the connecting rod and crank


Without waiting for the part, I already see a problem here, unless I don't understand crank/shaft mechanism

Eric N.
indocti discant et ament meminisse periti ​

 

[jackk]

remove the Rigid joint