Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
software sheet metal
- Thread starter nidbe
- Start date
MikeHalloran
Mechanical
That process is called "nesting".
You will probably get a copy of something suitable when you buy a sheet metal cutting machine, like a plasma or laser cutter.
The software often includes means to keep track of your inventory, sheet by sheet, and can nest on partial sheets if you use it rigorously, to the exclusion of any other inventory controls. ... so I doubt that anyone actually uses that feature.
You can get nesting/patterning software independent of a machine, too.
Bring your wallet, and be prepared for an aggravating learning curve.
Mike Halloran
Pembroke Pines, FL, USA
You will probably get a copy of something suitable when you buy a sheet metal cutting machine, like a plasma or laser cutter.
The software often includes means to keep track of your inventory, sheet by sheet, and can nest on partial sheets if you use it rigorously, to the exclusion of any other inventory controls. ... so I doubt that anyone actually uses that feature.
You can get nesting/patterning software independent of a machine, too.
Bring your wallet, and be prepared for an aggravating learning curve.
Mike Halloran
Pembroke Pines, FL, USA
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
