Softwares for String Modelling 1

[mpradhan]

Hi everyone!

I am trying to accurately model the motion of a string attached to a pulley and a crank. I am currently modelling on MSC Adams but I am running into problems that seem difficult to solve. Is there any good software specifically for string/rope modelling? Any help would be appreciated.

Thanks!

 

[FEA way]

I don't know about any software meant specifically for such purposes but a good Finite Element Analysis code with nonlinear dynamics capabilities should help you. Personally, I would choose Abaqus for this task but there are also many other options.

 

[jackaustin]

@mpradhan
Hello. I also want some help
"Physical modeling of prepared strings

Preparation is based on mathematical modeling of 2 basic elements; strings which can be configured as bars, and a rattling element. Each voice has a pair of strings connected by a rattle that reacts to the vibrations at each end. This uses the latest research in collision modeling to calculate the acoustic system in real-time. The strings have parameters for nonlinearity, inharmonicity, sustain, and tone. The rattle has controls for the mass at each end, the gap from the strings, the stiffness, edginess, strength, and its position. A low shelf EQ, overdrive, and reverb units complete the signal chain, giving a wide range of sounds from cutting leads to epic soundscapes."

 

[vepif2]

Thank all for sharing the guidelines

 

[GregLocock]

Here's what jacksutin is talking about

https://physicalaudio.co.uk/products/preparation/

You ain't doing that in ADAMS.

This is how

https://www.researchgate.net/public...ime_modular_physical_modeling_sound_synthesis

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?