Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Soldier Pile Embedment Depth

Status
Not open for further replies.

fargofarmer

Civil/Environmental
Feb 13, 2004
46
US
Does anybody the procedure to calculate embedment depth for soldier pile with tieback anchors in rock? I looked at Cir. No. 4 but I couldn't get any useful information.

Thanks for your suggestions.
 
Replies continue below

Recommended for you

ff;

Get yourself a copy of "Foundation Engineering" by Jumikis, 1986 and look at his "Equivalent Beam Method". This will give you procedure for embedment and anchor forces, etc. The FHWA publications on tieback designs are very conservative.
 
FixedEarth,

Thank you. I will try to find the book.

Thanks
 
PEinc,

Thank you for your sugesstion. Actually, I tried with this procedure. For some reason, I was thinking that I was using a wrong method Tieback anchor wall. Anyhow, thanks a lot for giving a valuable suggestions.

thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top