Jul 20, 2002 #1 Guest can i open unigraphics files in solid edge environment.I mean if a design a part in unigraphics can i opne that part in solid edge.
can i open unigraphics files in solid edge environment.I mean if a design a part in unigraphics can i opne that part in solid edge.
Jul 21, 2002 #2 slchouhan Mechanical Jun 22, 2002 2 yes u can certainly open unigraphics part in solid edge . parts can be opened directly or through parasolid translator . try it & good luck . Upvote 0 Downvote
yes u can certainly open unigraphics part in solid edge . parts can be opened directly or through parasolid translator . try it & good luck .
Jul 21, 2002 #3 ecky Military Jun 24, 2002 3 As well as being able to open the UG file in Solid Edge, you can also maintain associativity if they are on the same network, i.e. you make a change to the UG part and the part updates in SE. Upvote 0 Downvote
As well as being able to open the UG file in Solid Edge, you can also maintain associativity if they are on the same network, i.e. you make a change to the UG part and the part updates in SE.
