Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
solidedge st2
- Thread starter tinhman
- Start date
You don't say whether you are in sync or trad, but I believe it’s the same scenario
It sounds like your dimensions are locked.
To change a dimension from locked to unlocked, click the lock symbol on the dimension value edit handle, which is displayed when you click to place the dimension.
Or click the lock symbol in the Value area of the smart dimension or edit dimension areas. Right hand side of screen under the ribbon bar.
It sounds like your dimensions are locked.
To change a dimension from locked to unlocked, click the lock symbol on the dimension value edit handle, which is displayed when you click to place the dimension.
Or click the lock symbol in the Value area of the smart dimension or edit dimension areas. Right hand side of screen under the ribbon bar.
- Thread starter
- #3
Woodyscolts
Mechanical
I think it sounds more like for some reason your dimensions are driven dimensions (blue) and cannot be changed (underlined) unless they are converted to driving dimensions.
- Thread starter
- #5
- Status
