solidworks 2010 - curved hole, revolved cut?

[silguy]

Hi,

Anyone can help me how to create a patterned hole inside an extrusion, say a 2.5" diam hole x 5" length that has a 180 degree bend. I want that inside an extrusion block. I tried revolved cut but doesn't seem to let me do it. I'm able to swept boss/base no problem, but can't do the opposite.


Thanks in advance,

 

[CorBlimeyLimey]

Insert > Cut > Sweep

 

[silguy]

thanks! that did it!