Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IFRs on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Specs for A217-WC6

Status
Not open for further replies.

sloth4z

Mechanical
Aug 12, 2003
132
I am trying to find information regarding A217-WC6. I have discovered that it is a casting spec, but I can not find any specifications. Can someone point me in the right direction and point me to a book that would list the specifications for A217 Grade WC6?

I also need to know what procedures I should use for hardfacing portions of a part made from this material. Knowing the procedures would be great, but knowing where to find the procedures would be better.

I found this discussion already about welding A217-WC6, but I thought my question was different enough to start a new thread.

 
Replies continue below

Recommended for you

You can purchase the specification from the ASTM, it is also listed in Section II A of the ASME Code. WC6 is simply a 1 1/4% Cr - 1/2% Mo low alloy steel. It is listed in Group P-No 4. ASME Section IX provides essential and nonessential variables for qualifying hard surfacing procedures.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor