Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IFRs on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Splash Screen Errors

Status
Not open for further replies.

dmaciel

Aerospace
Apr 13, 2012
4
I am getting an error when I try to start NX 7.5. The error is "Bad Splash Screen File Name then NX shuts down. Anyone have any help on this.

Thanks,
Dave
 
Replies continue below

Recommended for you

Did you recently install or update your current versions of NX? Has anyone been messing with the volume where NX is installed? You may need to contact GTAC to help track down this problem.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
John,

Thanks for the reply John, I have had this happen before and I was able to fix it. What I did was run the repair program that is on 7.5 cd and this resolved the problem, operates perfectly now.

Dave Maciel
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor