Split line?

[reilly22]

I am working with a closed end tube that I would like to perform a Cosmosworks FEA on. I am interested in seeing stress and deflection along the inside edge of the tube. Is there a way to create either a split line or just a sketched line that I can use to pick points off of in FEA? Hopefully this makes sense. Thanks.

 

[Heckler]

You might have better success in the Cosmos fora forum1183

Best Regards,

Heckler
Sr. Mechanical Engineer
SWx 2007 SP 2.0 & Pro/E 2001
Dell Precision 370
P4 3.6 GHz, 1GB RAM
XP Pro SP2.0
NVIDIA Quadro FX 1400
o
_`\(,_
(_)/ (_)

(In reference to David Beckham) "He can't kick with his left foot, he can't tackle, he can't head the ball and he doesn't score many goals. Apart from that, he'

 

[reilly22]

I'm hitting both forums. There is not a lot of action on the Cosmos forum. Thought there might be some insight here.

 

[badboggs]

When you say the inside edge of the tube what exactly do you mean? Have you considered using the section clipping options in the results folder for your analysis?