SSR input current

[Mechd07]

I would like to know if a solid state relay's with the below control input specs will draw only needed current from a supply source of 24Vdc 0.75A.

Control voltage range: 4-32 Vdc
Minimum turn-off voltage and current: 4Vdc/6mA
Maximum turn-on voltage and current: 32Vdc/10mA
Maximum turn-off voltage: 1 Vdc

Link to component.

http://www.power-io.com/products/hdd.htm

 

[ScottyUK]

It will draw about 9mA at 24V DC. Your load will consume whatever your load consumes.


----------------------------------

I don't suffer from insanity. I enjoy it...

 

[itsmoked]

Make sure you fully understand the "general information" as that is where most SSR users make mistakes.

Keith Cress
Flamin Systems, Inc.-

http://www.flaminsystems.com