Stadard english/metric tolerence fits in NX

[cadmantools]

Is there a way to set the hole and shaft tolerance fits that are standard in the english and metric systems?
Example: RC1, H8, g6 etc.


NX6.0.5.3 mp07, Windows XP 64-bit,Team Center 8.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.

 

[JohnRBaker]

When creating 'Clearance Holes' using the NX Hole function, there is an option provided to define 'Fit', and in the case of Metric holes, they include an (H-) designation.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[cadmantools]

I remember coming across a text file in one of the sub-directories of NX that related to tolerance fits but can't seem to find it again. I think that is may have been a third party extension.

NX6.0.5.3 mp07, Windows XP 64-bit,Team Center 8.1
Running cad straight out of the box is OK but, a system tuned with application software is the best way to increase productivity.