Stainless Steel 3

[GFMJr]

Attempting to locate supplier of Stainless Steel X17CrNi 16-2, QT800 in 3.75” Dia. Bar. Can you assist? Thank you.

 

[EdStainless]

have you got a UNS number for that alloy?

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube

 

[ERAU82]

Checking ASM's Worldwide Guide to Equivalent Irons and Steels, 3rd Ed., shows that X17CrNi16-2 falls into the UNS S43100, AISI 431, and EN10088-3 categories. Check with your suppliers to see if they can supply their S43100/AISI 431 material to meet your specific requirements of X17CrNi16-2.

X17CrNi16-2 is an Italian specification. A quick internet search provided 2 good references for equivalents:

http://www.isoarc.ch/Info_Datenbank/pdfs/w_4057.pdf

http://www.trafilix.com/lucefin/it_pdf/AISI431.pdf

Good Luck

 

[GFMJr]

Thank you for opening up what had been a dead end for me on this so far. Really appreciate your efforts.

 

[TVP]

Cartech or Universal Stainless are the two North American options for stainless steel bar production. Ugitech and Outokumpu are other possibilities.

http://www.cartech.com

http://www.univstainless.com/products/specialty-bar.php

http://www.sprintmetal.com/index.php?id=1529

abbreviated as alloy 4057 from 1.4057 in EN 1008-3.

http://www.outokumpu.com/pages/Page____33505.aspx

 

[EdStainless]

The one thing that you will need to double check is the carbon level. This alloy is made with a number of different carbon levels for different applications.

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube