Standard Camlock Fitting Dimensions

[mattyjb88]

I am currently working on a design for a stilling chamber (or more accurately a by-pass chamber) for a guided wave radar level sensor. I am wanting to use camlock fittings as they make dissembling and assembling so simple.

I am working on a 3D model however I am finding it impossible to find the standard dimensions for camlock fittings. They are a standard type of fitting so must be made by some standard pattern. Does anyone have this information or know where I may be able to find it?

A reasonably thorough Google search has produced nothing of use.

any help would be great thanks.

 

[hydtools]

This link has some external dimensions, but not the groove detail:

http://www.lmc-couplings.com/filead...ages/LMC/LMC-cataloog_pdf/a1-c_gtechnical.pdf

It does reference various standards for details.

Ted

 

[mattyjb88]

Thanks! that helped. That helped me find the following:

- The current Standard is A-A-59326B

- The standard, with all dimensions etc can be found here:

http://www.everyspec.com/COMML+ITEM+DESC+(CID)/A-A-59326B_16384/

Thanks for your help!

 

[MikeHalloran]

This may be useful in some bizzare circumstance:

The process complementary to 'assembling' is 'disassembling'.

The process of 'dissembling' is something else entirely.



Mike Halloran
Pembroke Pines, FL, USA