Standard components source

[edgray]

I am looking for a source of models of standard components, like screws washer etc.

 

[ewh]

This has been addressed before, more recently here -->thread561-261621
You will probably find what you need.

"Good to know you got shoes to wear when you find the floor." - [small]Robert Hunter[/small]

 

[cowski]

Have a look at ThomasNet, 3d cad central, or cadyou.

http://www.thomasnet.com/cadmodels.html

http://www.3dcontentcentral.com/

http://www.cadyou.com/

A google search for 'free CAD models' will probably turn up lots more.

 

[ewh]

cowski makes some good sugestions, but I would check what is available in the NX fastener librarys first. Much of the tedious model prep has been done already that won't be included in neutral format models, such as those from vendors.
As an aside, I find it frustrating when a vendor model includes modeled screw threads that are not easily removed.

"Good to know you got shoes to wear when you find the floor." - [small]Robert Hunter[/small]