Static equilibrium error 1

[Alkalla]

please I have got this message for static equilibrium:

ERROR:
Static equilibrium analysis has not been successful.
The maximum number of iterations 25, has been reached.
For the last attempted iteration:
The equation with the largest error was Vessel.Rear_wheel_1 Comp = 6 Error = 2468.747118
The variable receiving the largest increment was Vessel.Fixed_Vessel Comp = 4 Delta = 308356.068501.
ERROR: Lockup detected.
ERROR: Lockup detected.

I want to know what is the problem, however the dynamic simulation is done

 

[GregLocock]

Try increasing the MAXIT for the static run, increasing the error, reducing the error or indeed fiddling with all of these parameters

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[GregLocock]

in particular static funnel often creates more problems than it solves

Cheers

Greg Locock


New here? Try reading these, they might help FAQ731-376

http://eng-tips.com/market.cfm?

 

[Alkalla]

Thanks GregLocock
I have already increased the maximum iterations (maxit), and found that the error increase in this case