Guest
HI:
First of all I would like to ask if there are any more forums for Ansys users.
Second, I have the question on modeling static magnetic fields. I am trying to have ANSYS display the magnetic field of simple bar magnet that has arbitrary permanent magnetization. It should be very simple but I can not get any reasonable results.
Here is the code that I am using:
!===========================
/prep7
et,1,13
keyopt,1,3,1
keyopt,1,1,0
/pnum,node,1
/pnum,mat,1
/units,si
mp,murx,1,1000
mp,mury,1,1000
mp,mgxx,1,-5000 !coersive force
/pnum,area,1
rectng,0,5,0,30
aplot
asel,s,area,,1
aatt,1,1,1,0
allsel,all
aplot
smrtsize,9
amesh,1
amesh,2
/solu
allsel,all
magsolv
/post1
plf2d
!=====================================
Can somebody help me out with this problem?
thank you
First of all I would like to ask if there are any more forums for Ansys users.
Second, I have the question on modeling static magnetic fields. I am trying to have ANSYS display the magnetic field of simple bar magnet that has arbitrary permanent magnetization. It should be very simple but I can not get any reasonable results.
Here is the code that I am using:
!===========================
/prep7
et,1,13
keyopt,1,3,1
keyopt,1,1,0
/pnum,node,1
/pnum,mat,1
/units,si
mp,murx,1,1000
mp,mury,1,1000
mp,mgxx,1,-5000 !coersive force
/pnum,area,1
rectng,0,5,0,30
aplot
asel,s,area,,1
aatt,1,1,1,0
allsel,all
aplot
smrtsize,9
amesh,1
amesh,2
/solu
allsel,all
magsolv
/post1
plf2d
!=====================================
Can somebody help me out with this problem?
thank you