Static Magnetic field problem

HI:

First of all I would like to ask if there are any more forums for Ansys users.

Second, I have the question on modeling static magnetic fields. I am trying to have ANSYS display the magnetic field of simple bar magnet that has arbitrary permanent magnetization. It should be very simple but I can not get any reasonable results.

Here is the code that I am using:
!===========================
/prep7
et,1,13
keyopt,1,3,1
keyopt,1,1,0
/pnum,node,1
/pnum,mat,1
/units,si
mp,murx,1,1000
mp,mury,1,1000
mp,mgxx,1,-5000 !coersive force
/pnum,area,1
rectng,0,5,0,30
aplot
asel,s,area,,1
aatt,1,1,1,0
allsel,all
aplot
smrtsize,9
amesh,1
amesh,2
/solu
allsel,all
magsolv

/post1
plf2d

!=====================================


Can somebody help me out with this problem?

thank you

 

[slava74]

If your analysis is for the infinite surrounding media, try infinite boundary elements as SURF9 or QUAD110 for example and...O men, I executed your file and after 25 error messages my ANSYS collapsed)). I'd better check all verif. manuals (VM for index search in HELP).