Jul 11, 2007 #1 amanites Mechanical Mar 23, 2007 21 Could someone advise me on a typical pipe specification for a steam line 14 barg operating at 210°C(slightly superheated). Thanks
Could someone advise me on a typical pipe specification for a steam line 14 barg operating at 210°C(slightly superheated). Thanks
Jul 11, 2007 #3 dcasto Chemical Jul 7, 2001 3,570 Schedule 40 up to 10" with ANSI 300 fittings. That will give a 260 C and 40 bar rating. Upvote 0 Downvote
Jul 11, 2007 Thread starter #4 amanites Mechanical Mar 23, 2007 21 sorry I forgot to say it is a 12" line. Upvote 0 Downvote
Jul 16, 2007 #5 GregLamberson Petroleum Dec 2, 2006 577 amanites Be sure and check with B31.3 (most commonly used for steam lines) or B31.1 when looking at your overall system components & design. You may want to look at ASME SEC I, Figure 100.1.2, A & B (in B31.1) There have been some good threads on steam lines/systems, a search will turn them up. Greg Lamberson, BS, MBA Consultant - Upstream Energy Website: http://www.oil-gas-consulting.com Upvote 0 Downvote
amanites Be sure and check with B31.3 (most commonly used for steam lines) or B31.1 when looking at your overall system components & design. You may want to look at ASME SEC I, Figure 100.1.2, A & B (in B31.1) There have been some good threads on steam lines/systems, a search will turn them up. Greg Lamberson, BS, MBA Consultant - Upstream Energy Website: http://www.oil-gas-consulting.com
Jul 17, 2007 #6 dcasto Chemical Jul 7, 2001 3,570 12" sch 40 would be good for 35 barg Upvote 0 Downvote
