Currently my company uses ASTM A53 Grade A for all steam and condensate service. Our main boiler pressure is 130 PSIG. Can someone help explain to me why you would use one or the other and if ASTM A53 Grade A or B is acceptable for my application? My previous company use ASTM A106 for steam and condensate at 130 PSIG steam.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Steam Service Piping Material <150 PSIG 1
- Thread starter NCENG78
- Start date
-
1
- #2
gr2vessels
Mechanical
Review the thread below;- it was discussed previously, check also the 'Search" facility in the top of this page.
Cheers,
gr2vessels
Cheers,
gr2vessels
- Thread starter
- #3
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question