In the mid 1990s I saw an article discussing the use of Finite Element Analysis to determine how work roll bearings were failing on a Finishing mill. The bearings were only failing on one particular mill stand. The article showed how FEA was used to determine the abnormal loads on the bearings. Can anyone tell me who wrote the article, which magazine the article was published in, or which Steel Mill was having the bearing failures ?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Steel Mill Work Roll Bearing Failures - using FEA
- Thread starter reliaengr
- Start date
Similar threads
- Locked
- Question