Steel Tensile Strength 1

[NIckSi]

Hello I have been searching for some Tensile strength data of tool steels. I am looking for A-2, O-1, M-2,M-3,D-2,S-7. if anyone has yeild strength, impact strength and machinability that would be great too!!

 

[NickE]

Try here (although tensile test data for these steels is rare, there is some information on the following sites.)

http://www.crucibleservice.com/datasheets/index.cfm

http://www.timken.com/products/specialtysteel/engineering/tech_info/coldworktoolsteel.asp

 

[NIckSi]

Hey thanks NickE I know the data is rare. as i have been searching for it for about a month now and haven't found a single one!! hahahaha oh well such is life. what about impact resistance? ohh and another question there seems to be two scales for machinability one is comparing it to a 1% carbon and the other compares it to a W1 tool steel. how do these scales compare?

 

[jbknudsen]

Try this site

http://www.matweb.com

This is a site that has an extensive list of materials including tool steel. There are many options listed, or you may search by name, composition, etc. I hope this helps.


Jay

 

[EdStainless]

Contact your local Crucible service center. They can get you more detailed information.

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm

 

[NIckSi]

thanks guys the matweb was especially helpful