steel transmission tower 1

[dfopiso]

hello to all,

im in need of dimensions of steel transmission towers for 500KV, 230KV and 115KV. kindly point me to an existing thread (if available) or any site.

thanks.

 

[Eleceng01]

dfopiso,
You can find several references that have this information under the Power Engineer FAQs "What are good references for power engineers" in Eng-Tips. I would start with the Network Protection and Automation Guide (

http://tinyurl.com/2f3t9s)

Figure 5.17.

 

[cuky2000]

Check on the EPRI Transmission line reference books.

There are several details for latice, tubular and even wood pole design.

 

[dfopiso]

thanks for your replies
cuky: is reference ebook or printed? if ebook kindly refer me to their site

 

[cuky2000]

To find updated information on the book print status, call EPRI Customer Assistance Center at 800-313-3774. Beware that for not EPRI members the price of some books could cost several US thousand of dollars.

 

[dfopiso]

thanks for the info

 

[bacon4life]

I found a neat link by Areva, but it takes a bit to find it.

Google t fictitious bus three winding transformer:

http://www.google.com/search?num=10...&q=t+fictitious+bus+three+winding+transformer

Then it is about the 25th link. It takes you to Chapt 5.exe which is ftp://ftp.areva-td.com/NPAG/Chap5-46-77.pdf.

Unfortunately just putting in the link does not seem to work quite right.

 

[dfopiso]

thanks bacon