Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Stepper motor analyzer
- Thread starter kristinj
- Start date
jbartos
Electrical
- Jan 15, 2000
- 6,440
- 0
- 0
Suggestion: Visit
and type Motor Testing Equipment: Electric under Product or Service, which will return 14 companies to approach to
and type Motor Testing Equipment: Electric under Product or Service, which will return 14 companies to approach to
janderson2
Electrical
There are several manufacturers of these testers.
Vibrac in Amherst NH is probably the best known. They have lab or production systems that can measure motors with a wide range of inertia matching. (expensive but good)
Magtrol has equipment that can do the job.
Also, a company in the Chicago area (S. Himmelstein) has some excellent equipment. I used their modules to build a custom system for a company I was working with in Korea.
Ther are a couple of offshore (Japanese) sources also. These are quite good.
You need to consider;
1. Cost
2. Speed of test
3. Accuracy. Detent can be accomplished with a Torque watch, but will ony give the high readings.
Good luck!
Vibrac in Amherst NH is probably the best known. They have lab or production systems that can measure motors with a wide range of inertia matching. (expensive but good)
Magtrol has equipment that can do the job.
Also, a company in the Chicago area (S. Himmelstein) has some excellent equipment. I used their modules to build a custom system for a company I was working with in Korea.
Ther are a couple of offshore (Japanese) sources also. These are quite good.
You need to consider;
1. Cost
2. Speed of test
3. Accuracy. Detent can be accomplished with a Torque watch, but will ony give the high readings.
Good luck!
- Status
Similar threads
- Locked
- Question